Product Description:
This product falls under the category of Diesel Fuel Testing Equipment and is designed to be user-friendly, with a display accuracy of 0.1℃. The equipment has a weight of 40kg, making it easy to transport and store.
The Diesel Fuel Testing Equipment uses the ISO13736 Abel Closed Cup Flash Point Tester, which is a widely recognized method for determining the flash point of diesel fuel. This method involves heating the fuel in a closed cup until it ignites, and then recording the temperature at which ignition occurs. The Abel Closed Cup Flash Point Tester is a reliable and accurate method for testing the flash point of diesel fuel.
In addition to diesel fuel, the Diesel Fuel Testing Equipment can also be used to test the flash point of aviation fuel. The Aviation fuel flash point tester Abel is also based on the Abel Closed Cup Flash Point Tester, and is widely used in the aviation industry to test the flash point of aviation fuel. The Aviation fuel flash point tester Abel is a critical tool for ensuring the safety of aviation fuel.
The Diesel Fuel Testing Equipment uses a compressor cycle refrigeration system to cool the equipment, ensuring that it can be used for extended periods of time without overheating. This cooling method is reliable and efficient, making the Diesel Fuel Testing Equipment a dependable tool for testing the flash point of diesel fuel and aviation fuel.
Features:
Product Information
- Product Name: Diesel Fuel Testing Equipment
- Product Category: Diesel Fuel Testing Equipment
- Heating Rate: 1℃/min
- Ambient Temperature: 10-40℃
- Abel Flash Point Size: 490*450*580mm
- Weight: 40kg
Features
- Automatic Abel Closed Cup Flash Point Tester
- Aviation fuel flash point tester Abel
- Automatic Abel Closed Cup Flash Point Tester
Technical Parameters:
| Product Name | Diesel Fuel Testing Equipment Automatic Abel closed flash point tester ISO13736 |
| Range | -30℃ ~ 80℃ |
| Applicable Standards | GB/T21789, ISO13736 IP170 |
| Weight | 40kg |
| Abel Flash Point Size | 490*450*580mm |
| Mixing Speed | 0.5r/s(30r/min) |
| Display Mode | 6.4" TFT LCD |
| Temperature Detection | Platinum Resistance (PT100) |
| Low Temperature Circulating Refrigerator | ≤1200W |
| Key Words | Abel Closed Cup Flash Point Tester |
Applications:
The SY264 Abel Closed Cup Flash Point Tester is built according to the ISO13736 standard, which ensures its accuracy and reliability in testing diesel fuel. This certification also guarantees the product's quality and safety standards. With a supply ability of 10,000 sets per year, Shengtai Instrument ensures that you will always have access to this product when you need it.
The Abel Closed Cup Flash Point Tester is a must-have for any laboratory, refinery, or fuel testing facility. It is used to determine the flash point of diesel fuel, which is the temperature at which the fuel vaporizes and ignites when exposed to a flame or spark. This information is crucial for determining the fuel's safety during transportation, storage, and combustion.
The SY264 Abel Closed Cup Flash Point Tester is easy to use and comes with a mixing speed of 0.5r/s (30r/min) and a heating rate of 1℃/min. It weighs 40kg and requires a power supply of AC 220V±10%, 50Hz. This product is delivered within 7-15 work-days in a wooden case packaging.
Some of the application occasions and scenarios where the SY264 Abel Closed Cup Flash Point Tester can be used include:
- Oil and Gas Refineries
- Chemical Laboratories
- Fuel Testing Facilities
- Transportation Companies
- Environmental Protection Agencies
Investing in the SY264 Abel Closed Cup Flash Point Tester from Shengtai Instrument ensures that you have a reliable and accurate tool for testing diesel fuel. With its ISO certification and high supply ability, you can trust that this product will always meet your needs.
Payment terms for this product are T/T, and it is commonly referred to as the ISO13736 Abel Closed Cup Flash Point Tester.
Support and Services:
Our Diesel Fuel Testing Equipment is designed to provide accurate and reliable testing results for diesel fuel quality analysis. Our product technical support team is available to assist with any questions or concerns you may have regarding the use of the equipment, including troubleshooting and maintenance tips. In addition, we offer a range of services to ensure that your equipment operates at peak performance, including calibration and certification. Our team of trained technicians can provide on-site training and installation services to ensure that your equipment is set up correctly and functioning properly. We also offer ongoing support through our warranty program and technical support hotline. Our goal is to ensure that our customers have the tools and support they need to make informed decisions about their diesel fuel quality.
Packing and Shipping:
Product Packaging:
The Diesel Fuel Testing Equipment will be packaged securely to ensure safe delivery. The product will be placed in a sturdy cardboard box with adequate cushioning material to prevent any damage during transportation.
Shipping:
We offer worldwide shipping for the Diesel Fuel Testing Equipment. Once your order is confirmed, we will process it within 24 hours. The delivery time will depend on your location and the shipping method selected at checkout. You will receive a tracking number to monitor the status of your shipment.
FAQ:
Here are some frequently asked questions about our Diesel Fuel Testing Equipment:
Q: What is the brand name of this equipment?
A: The brand name of this equipment is Shengtai instrument.
Q: What is the model number of this equipment?
A: The model number of this equipment is SY264.
Q: Where is this equipment made?
A: This equipment is made in China.
Q: What is the minimum order quantity for this equipment?
A: The minimum order quantity for this equipment is 1.
Q: What are the payment terms for purchasing this equipment?
A: The payment terms for purchasing this equipment are T/T.
Q: Is this equipment certified?
A: Yes, this equipment is certified with ISO9001.
Q: What is the supply ability for this equipment?
A: The supply ability for this equipment is 10000 sets per year.
Q: What is the delivery time for this equipment?
A: The delivery time for this equipment is 7-15 work-days.
Q: How is this equipment packaged?
A: This equipment is packaged in a wooden case.
